TERMS IN MEASUREMENT
A Measurement is the outcome of an opinion formed by observers about some physical quantity.
CLASSIFICATION OF MEASUREMENTS:
- Standards – ( Reproduce the value of given quantity )
- Fixed Gauges – (Check Dimensions)
- Measuring Instruments – (Determine the measured value)
NEEDS FOR MEASUREMENT:
1. To Determine the true dimensions of a part.
2. To increase our knowledge and understanding of the world.
3. Needed for ensuring public health and human safety.
4. To convert physical parameters into meaningful numbers.
5. To test if the elements that constitute the system function as per the design.
6. For evaluating the performance of a system.
7. For studying some basic laws of nature.
8. To ensure interchangeability with a view to promoting mass production.
9. To evaluate the response of the system to particular point.
10. To check the limitations of theory in actual situations.
11. To establish the validity of design and for finding new data and new designs.
METHODS OF MEASUREMENT:
1. Direct Comparison
2. Indirect Comparison
3. Comparative Method
4. Coincidence Method
5. Fundamental Method
6. Contact Method
7. Transposition Method
8. Complementary Method
9. Deflection Method
Measurements are directly obtained.
Obtained by measuring other quantities.
Ex:Diameter measurement by using three wires.
It’s compared with other known value.
Measurements coincide with certain lines and signals.
Measuring a quantity directly in related with the definition of that quantity.
Sensor/Measuring tip touch the surface area.
Quantity to be measured is first balanced by a known value and then balanced by an other new known value.
Ex:Determination of mass by balancing methods.
The value of quantity to be measured is combined with known value of the same quantity.
Ex:Volume determination by liquid displacement.
The value to be measured is directly indicated by a deflection of pointer.
TERMS OF MEASUREMENT:
The ability of the instrument to reproduce it’s readings or observation again and again for constant input signal.
Closeness/conformity to the true value of the quantity under measurement.
The difference between true value and measured value is known as measurement error.
Error = Vt – Vm
It is defined as the probability that a given system will perform it’s function adequately for it’s specified period of lifetime under specified operating conditions.MMM
Tags: check dimensions, coincidence, comparative method, Comparators, Comparison, deflection method, Determination, Diameter, diameter measurement, function, fundamental method, human safety, indirect method, Instruments, interchangeability, laws of nature, mass, mass production, meaningful numbers, MEASUREMENTS, Measuring, measuring instruments, Method, method 9, METHODS, nature, opinion, physical parameters, physical quantity, production, quantity, surface area, tip, transposition method, true dimensions, validity, value, vernier caliper, world 3You can comment below, or link to this permanent URL from your own site.