NANO GENERATOR

After six years of intensive effort, scientists are reporting development of the first commercially viable Nano generator, a flexible chip that can use body movements — a finger pinch now en route to a pulse beat in the future — to generate electricity.

This development represents a milestone toward producing portable electronics that can be powered by body movements without the use of batteries or electrical outlets.

The latest improvements have resulted in a Nano generator powerful enough to drive commercial liquid-crystal displays, light-emitting diodes and laser diodes. By storing the generated charges using a capacitor, the output power is capable to periodically drive a sensor and transmit the signal wirelessly.

If we can sustain the rate of improvement, the Nano generator may find a broad range of other applications that require more power.

Example:

• Personal electronic devices powered by footsteps activating Nano generators inside the sole of a shoe;
• Implanted insulin pumps powered by a heart beat; and
• Environmental sensors powered by Nano generators flapping in the breeze.

Preparation:

The key to the technology is zinc oxide (ZnO) nanowires. ZnO nanowires are piezoelectric — they can generate an electric current when strained or flexed. That movement can be virtually any body movement, such as walking, a heartbeat, or blood flowing through the body. The nanowires can also generate electricity in response to wind, rolling tires, or many other kinds of movement.

The diameter of a ZnO nanowire is so small that 500 of the wires can fit inside the width of a single human hair. Scientist found a way to capture and combine the electrical charges from millions of the Nano scale zinc oxide wires. They also developed an efficient way to deposit the nanowires onto flexible polymer chips, each about a quarter the size of a postage stamp. Five Nano generators stacked together produce about 1 micro Ampere output current at 3 volts — about the same voltage generated by two regular AA batteries (about 1.5 volts each).

While a few volts may not seem like much, it has grown by leaps and bounds over previous versions of the Nano generator. “Additional nanowires and more Nano generators, stacked together, could produce enough energy for powering larger electronics, such as an iPod or charging a cell phone.”

NANO GENERATOR

After six years of intensive effort, scientists are reporting development of the first commercially viable Nano generator, a flexible chip that can use body movements — a finger pinch now en route to a pulse beat in the future — to generate electricity.

This development represents a milestone toward producing portable electronics that can be powered by body movements without the use of batteries or electrical outlets.

The latest improvements have resulted in a Nano generator powerful enough to drive commercial liquid-crystal displays, light-emitting diodes and laser diodes. By storing the generated charges using a capacitor, the output power is capable to periodically drive a sensor and transmit the signal wirelessly.

If we can sustain the rate of improvement, the Nano generator may find a broad range of other applications that require more power.

Example:

• Personal electronic devices powered by footsteps activating Nano generators inside the sole of a shoe;
• Implanted insulin pumps powered by a heart beat; and
• Environmental sensors powered by Nano generators flapping in the breeze.

Preparation:

The key to the technology is zinc oxide (ZnO) nanowires. ZnO nanowires are piezoelectric — they can generate an electric current when strained or flexed. That movement can be virtually any body movement, such as walking, a heartbeat, or blood flowing through the body. The nanowires can also generate electricity in response to wind, rolling tires, or many other kinds of movement.

The diameter of a ZnO nanowire is so small that 500 of the wires can fit inside the width of a single human hair. Scientist found a way to capture and combine the electrical charges from millions of the Nano scale zinc oxide wires. They also developed an efficient way to deposit the nanowires onto flexible polymer chips, each about a quarter the size of a postage stamp. Five Nano generators stacked together produce about 1 micro Ampere output current at 3 volts — about the same voltage generated by two regular AA batteries (about 1.5 volts each).

While a few volts may not seem like much, it has grown by leaps and bounds over previous versions of the Nano generator. “Additional nanowires and more Nano generators, stacked together, could produce enough energy for powering larger electronics, such as an iPod or charging a cell phone.”

INDUCTIVE CHARGING

In the future all electronic devices will be wirelessly powered. Small, battery-powered gadgets make powerful computing portable.

The battery charger should be capable of charging the most common battery types found in portable  devices today.  In addition, the charging  should be  controlled from the base station and a bidirectional communication system between  the pickups  and base  station  should be developed.

Inductive Power Systems:

Inductive Power Transfer (IPT)  refers to the concept of transferring electrical power between two isolated circuits across an air gap.  While based on the work and concepts developed by pioneers such as  Faraday and Ampere, it  is  only recently that IPT has been developed into working systems.

Essentially, an IPT system can be divided into two parts;

• Primary and
• Secondary.

The primary side of the system is made up of a resonant power supply and a coil. This power supply produces a high frequency sinusoidal current in the coil.  The secondary side (or ‘pickup’) has a smaller coil, and a converter to produce a DC voltage.

Working of Inductive Power Transfer:

In this system communications signals are encoded onto the waveform that provides power to the air gap. Communication from the primary side to the secondary is implemented by switching the power signal at the output of the resonant converter between its normal level  and a lower level which is detectable by the pickup but still provides enough power to control the pickup microcontroller. This process is called Amplitude Shift Keying (ASK). This is achieved by varying the output voltage of the buck converter which provides an input DC voltage to the resonant converter.

Communication from the secondary to the primary is achieved by a process called Load Shift Keying (LSK).  This involves varying the loading on the pickup.   Any load on the pickup will reflect a voltage on the primary circuit proportional to the load.  Therefore a variation in the load on the pickup can be detected by the charging station.

The communications system must provide two discrete levels of voltage reflected onto the primary side,  to represent the on and off states for digital communications. The difference must be easily detected on the primary side to provide a robust communications channel. Signals are decoded by simple filters and comparators which feed a  digital signal to the microcontrollers.

Advantages:

IPT has a number of advantages over other power transfer methods  – it is unaffected by dirt, dust, water, or chemicals.  In situations such as coal mining IPT prevents sparks and other hazards.  As the coupling is magnetic, there is no risk of electrocution even when used in high power systems.  This makes IPT very suitable for  transport  systems where vehicles follow a fixed track,  such as  in factory materials handling.