Posted tagged ‘degree angle’

Latest Interview Questions & Answers

September 16, 2011

01-interview method-interview nervousness-interview notice

1. What is Auto Dosing?

Auto dosing is an automated system of feeding the equipment with liquid products. It is the ideal way to ensure the correct calibrated dose at the right time every time in auto.

2. Difference between Codes, Standards and Specifications?

  • Code is procedure of acceptance and rejection criteria.
  • Standard is accepted values and compare other with it.
  • Specification is describing properties of any type of materials.

3.  Difference between Strainer and Filter

Strainer for coarse size, Filter is more accurate than Strainer.

4. What are differences between Welding & Brazing?

In Welding concentrated heat (high temperature) is applied at the joint of metal and fuse together.

In Brazing involves significantly lower temperatures and does not entail the melting of base metals. Instead, a filler metal is melted and forced to flow into the joint through capillary action.

5. What does a pump develops? Flow or Pressure

A pump does not create pressure, it only creates flow. Pressure is a measurement of the resistance to flow.

6. Which is heavier 1kg of Iron or 1kg of Cotton? and why?

Both of them have same weight. The only difference is the volume of Iron is small compared to Cotton.

7. What will be the position of Piston Ring?

In 180 degree angle the Top ring, Second ring and Oil ring are fixed. Position the ring approximately 1 inch gap below the neck.

TATA Motors Recruitment Test

August 23, 2011

Some of the questions that were asked in this test include:

1. When boiler bursts, whom u would inform?
2. What does one mean by modular ratio?
3. What is ‘envelope of damped free vibration’?
4. A ball with a mass M is falling on to the ground with some velocity V1 and rising with velocity V2 . Find the impulse?
5. Contd.. for 5th problem. When time of contact is given then find force exerted on the ground.
6. Two masses are connecting with string on to pulley coefficient of friction of mass m1 is given and also m1 and m2 are given. Find the relation b/n m1 and m2 , to make m2 move downwards .
7. In a damped free excitation system maximum amplitude occurs
a. before resonance             b. after resonance
8. What are set screws?
9. A four bar link mechanism is given with moment m acting on crank and also a force given at crank end. Find the reaction at hinged end of crank.
10. Deflection due to self weight of a uniform rod of diameter D and unit density and length is given by____________.
11. Name the type of key used in wrist watch?
12. Bending stress is proportional to_____________
13. The hypoid gears are __________
14. Hollow cylinder of outer D0 is given. Find the diameter of solid cylinder for the same material and same torsional strength ?
15. What is the principle plane ?
16. Two masses are resting on a inclined plane with 30 degree angle and the two masses are welded with weightless rod and coefficients of friction is given. Find the common acceleration of a two masses.
17. Two masses are of different weights smaller one is placed on the bigger mass. If the force is acting on bigger mass (given),  find the acceleration of smaller mass.
18. Stress on minor diameter of bolt when bolt is subjected to longitudinal force.
19. no of independent elastic constants required for isotropic material?
20. pitch of the bolt of 30 mm metric thread dia meter is?
21. the ratio of natural frequency on earth to moon?
22. upper portion of set screw is given fig shown and asked which type of set screw is ?
23. Efficiency of screw jack formula?
24. which of the parts given is harder one? Ans a). inner case b)outer case like that?
25. Max efficiency of screw jack formula?
26. Given some c/s of diffirent types which is having more torsional strength ?
27. Max principle stress theory is valid for which material?
28. efficiency of reveted joints of different types has given which is having max efficiency ?
29. if the roots are real then which type of vibrations will occur in damped systems ?
30. problem on transmissibility ?
31. when the disc is rotating on which on man is standing at the edge then what is the possibility of increase in speed of the disc? A).man moves towards centre b)out ward? Like that
32. what is the principle behind the collisions of ball ?which is related to Q.7 ? ans constant linear momentum.
33. Find the elongation of the bar due to self weight
34. Problem on the cantilever deflection
35. Problem on the two blocks connected by string one is on table and on is hanging from the pulley…mechanics’ problem
36. Ratio of the tension of the band block breaks
37. max and normal efficiency of the power scew
38. what is monel metal
39. for which material max normal stress theory is used
40. efficiency of the riveted joints
41. coefficient of friction for the greased ball bearing
42. which key is used in wrist watch
43. bending stress is proportional to 1. directly/inversely proportional to section modulus
44. find the width of the strongest beam that can be cut of cylindrical log of wood whose dia is ‘d’
45. if the phi is friction angle then which of the following can not be the value of the tan(phi) a) 0 b) 1.5 mu etc. ans is 0
46. problem on the transmissibility …to calculate dynamic amplitude
47. what is the poison’s ratio?


12. Bending stress is proportional to  section modulus
13. The hypoid gears are non intersecting non parallel gears.