Posted tagged ‘rope’

JIB CRANE

August 23, 2011

Jib crane have the following motions:

    1. Hoisting motion
    2. Derricking or luffing motion
    3. Slewing motion
    4. Long travel motion

Hoisting motion:

It is used to lift or lower the load. This is usually achieved by steel wire ropes being affixed to a crane hook or a grab hanging from the outer end of the jib. The rope is applied through some receiving arrangement and controlled and operated by a winch system.

01-crane hoist-tower crane-electric hoist-jib crane motion-to lift or lower the load-steel wire ropes

Derricking or Luffing motion:

It is imparted to the inclined member or the jib to move in a vertical plane so that the angle of the jib may be changed in order to bring the load line nearer to or further off from the centre of the crane.

01-derricking motion-luffing motion-of jib cranes-jib move in vertical plane

Slewing motion:

It is imparted to the whole super structure of the crane including the jib, so that it can turn about a central pivot shaft w.r.t. the non-revolving parts. This motion enables the crane to shift the load line to revolve round the crane.

01-wall mounted jib crane-for handling light weight materials-slewing motion

Long Travel Motion:

It may be required when the whole crane structure has to be shifted to a distant place along a rail track or along a road.

01-crawler mounted mobile jib cranes-travelling type jib cranes-power driven cranes-long travel motion

Jib crane consists of an inclined member supported by a rope or any other type of structural member attached to a vertical mast or frame. Load is usually suspended from the outer end of this inclined mast. The outreach of the jib may be fixed or variable. The cranes as a whole may be either fixed or moveable. Various sub-classification of these cranes are possible.

Lifting capacity of such cranes may vary from 1/2 ton to 200 ton and outreach from a few meter to 50 meter. Such cranes find various applications in port area, construction site, and other outdoor works.

For handling general cargo, lifting capacities are usually 1  1/2 ton to  5 ton with maximum outreach of 30 meter. Jib Cranes provided with grabbing facilities have usually a capacity ranging from 3 to 20 tons operating 50 to 100 cycles per hour. Lifting heights may be 30 meters or more.

Jib crane used in ship yards for lifting heavy machinery and equipment, weighing 100 to 300 tons, are usually mounted on pontoons. Frequently these cranes are provided with two main hoisting winches which can be employed singly or together to lift a load. For handling light loads these cranes may have auxiliary arrangement.

Types Of Jib Crane:

Depending on the use, jib cranes are classified into a number of varieties, primarily on the basis of their mountings.

These are:

    1. Hand Operated Scotch Derrick Type
    2. Wall Mounted Jib crane
    3. Portal / Semi-portal cranes of different varieties-Wharf cranes
    4. Mobile jib cranes consisting of truck mounted and crawler mounted cranes

Scotch Derrick Type / Wall Cranes:

01-wall mounted jib crane-for handling light weight materials

Wall cranes are used in ware houses for handling light weight and when there is little or no wharf between them and the water front. Slewing or rotational motion of the crane is possible within restricted angle and the motion is slow. Hoisting and lifting speeds are comparable to those of wharf cranes. In some modified version these cranes can have travelling speed along the wall.

01-scotch derrick cranes-hand operated jib crane

Wharf Cranes:

These are used in shipyard and port for handling unit and bulk load. These are usually self propelled balanced level luffing type with full circle slewing motion facility. Wharf cranes may be of different types, depending on the type of structure on which it is mounted.  The choice of structure for mounting depends on site condition.

01-wharf cranes-semi portal cranes-full portal cranes-jib cranes-girders connected at both the ends

The principal types of wharf cranes are:

  • High pedestal
  • Full Portal
  • Semi-portal

Portal Cranes:

Portal crane is a fixed or revolving type jib crane mounted on a portal frame fixed in location or arranged to travel along a fixed track of rails at the same level. The portal frame consists essentially of horizontal girders connected at both ends to vertical or inclined member’s having equal lengths.

Semi portal Crane:

Semi portal crane is a fixed or revolving type jib crane mounted on a semi portal frame fixed in location or arranged to travel along a fixed track or rails at different levels. The semi portal frame essentially consists of horizontal girders connected at both ends to vertical or inclined members which constitute a shorter side and a longer side. The shorter members may consist only of the trolley running along the elevated rail.

01-semi portal cranes-full portal cranes-wharf crane-types of jib crane

Mobile crane:

Mobile Crane ( Power Driven ) includes all type of travelling jib cranes, such as truck mounted, crawler mounted, locomotive crane on rails.

01-crawler mounted mobile jib cranes-travelling type jib cranes-power driven cranes

 

01-mobile cranes-travelling jib cranes-Truck mounted jib crane

CONVEYOR

August 23, 2011

Conveyor Take-up Arrangement:

01-belt conveyor-take up arrangement-screw take up-take up pulley-automatic take up device-fixed take up device-manual take up-self adjusting take up devices


All belt conveyors require the use of some form of take-up device for the following reasons:

  • To ensure adequate tension of the belt leaving the drive pulley so as to avoid any slippage of the belt
  • To ensure proper belt tension at the loading and other points along the conveyor
  • To compensate for changes in belt length due to elongation
  • To provide extra length of belt when necessary for splicing purpose.

Usually there are two types of take up arrangements.

  • Fixed take up device that may be adjusted periodically by manual operation
  • Automatic take up devices for constant load type

In a screw take up system the take up pulley rotates in two bearing blocks which may slide on stationery guide ways with the help of two screws. The tension is created by the two screws which are tightened and periodically adjusted with a spanner. It is preferable to use screws with trapezoidal thread t decrease the effort required to tighten the belt.

01-hydraulic take up device-pneumatic take up device-electrical take up device-self adjusting take up device-automatic take up device

The main problem with the use of manual take-up is that it requires a vigilant and careful operator to observe when take up adjustment is required. Perfect tension adjustment with this system is also not possible. For this reason these devices are used only in case of short conveyors of up 60 m length and light duty.

In automatic take up arrangement the take up pulley is mounted on slides or on a trolley which is pulled backwards by means of a steel rope and deflecting pulleys. The carriage travels on guide ways mounted parallel to the longitudinal axis of the conveyor, i.e., horizontally in horizontal conveyors and at an incline in inclined conveyors. Hydraulic, pneumatic and electrical take up devices are also used.

Automatic take-up has the following features:

  • It is self adjusting and automatic
  • Greater take-up movement is possible.